Safety at LDM
All information on safety can be found on the intranet, under "activities", prevention and safety. We encourage users and internal staff to consult the Prevention and Safety section of Elettra - Sincrotrone Trieste website, where you will find a comprehensive collection of procedures and safety instructions. You will also find instructions on how to manage an emergency, first aid numbers, as well as a dedicated page on COVID-19.
Special on COVID-19
In accordance with Circolare 15/2020, all workers operating at the beamline must observe the following rules:
- Maintain a safe distance of at least 1m and minimize contact with other persons.
- Coordinate work in order to reduce contact times. Split the work into shifts or into separate days whenever possible.
- Always carry a surgical-type mask with you and wear it whenever a distance of at least 1m cannot be maintained.
- A maximum number of three persons (including, when authorized, external users) may work at each beamline experimental station and in ventilated rooms (experimental hutches, laboratories) without masks as long as a distance of at least 1m can be maintained. Whenever more than three people are needed to perform an experiment, a preliminary authorization should be obtained from the group coordinators.
- Masks must not be shared. Used surgical-type masks must be discarded in the dedicated bins. Information on bin locations is made available by the SPP.
- Wash hands with soap regularly following the established rules. In addition, hand sanitizer dispensers can be found on site.
- The equipment shared by multiple persons has to be cleaned with disinfectants before and after each use. Whenever that is not possible, gloves will have to be worn by each researcher.
The SPP (Servizio Prevenzione e Protezione) can provide all workers on site with a set of 5 surgical-type masks. Additional information can be found here.
Work places
A maximum presence of four people is allowed at the LDM beamline. The work places have been marked with tape. Two are at the control desk, the third one at the nearby data analysis desk, and the fourth one along the south wall. See the photos.
Ultima modifica il Giovedì, 27 Agosto 2020 15:39