Safety


All information on safety can be found on the intranet, under "activities", prevention and safety. We encourage users and internal staff to consult the Prevention and Safety section of Elettra - Sincrotrone Trieste website, where you will find a comprehensive collection of procedures and safety instructions. You will also find instructions on how to manage an emergency, first aid numbers, as well as a dedicated page on COVID-19.

 


 

Special on COVID-19

In accordance with Circolare 15/2020, all workers operating at the beamline must observe the following rules:

  1. Maintain a safe distance of at least 1 meter and minimize contact with other persons.
  2. Coordinate work in order to reduce contact times. Split the work into shifts or into separate days whenever possible.
  3. Always carry a surgical-type mask with you and wear it whenever a distance of at least 1 meter cannot be maintained.
  4. maximum number of two persons (including, when authorized, external users) is allowed work at each beamline experimental station and in ventilated rooms (experimental hutches, laboratories) without masks as long as a distance of at least 1 meter can be maintained. Whenever more than two people are needed to perform an experiment, a preliminary authorization should be obtained from the group coordinators.
  5. Masks must not be shared. Used surgical-type masks must be put in the dedicated bins. Information on bin locations can be found here.
  6. Wash hands with soap regularly following the established rules. In addition, hand sanitizer dispensers can be found on site.
  7. The equipment shared by multiple persons has to be cleaned with disinfectants before and after each use. Whenever that is not possible, gloves will have to be worn by each researcher.
The beamline personnel is responsible for keeping the work station clean and tidy. The end-station has been equipped with a bottle of Meliseptol disinfectant. A disinfectant (0.1% Sodium hypochlorite solution) will be soon provided by SPP. These products must be used to clean and disinfect the control table, keyboard, mouse, trackball and all other equipment that are frequently used in experiments. Cleaning has to be done before starting a shift as well as when concluding it. It is advised to cover the keyboard with domopak to protect it from contaminations.

The SPP (Servizio Prevenzione e Protezione) can provide the staff with a set of 5 surgical-type masks. Additional information can be found here.
 

Work places

A maximum presence of two people in the endstation-area, plus other two people at the desks locted outside, is allowed. The workstations have been marked with tape and are shown in the pictures below. Two (first two images) are at the control workstations, other two (last image) are outside, at the end of the corridor, and should be used just for real-time data visualization and treatment (and not for standard office work).


SPRINT Control Workstation
T-ReX Control Workstation
Data Analysis Workstations

 
Ultima modifica il Martedì, 13 Ottobre 2020 16:49