Safety
Special on COVID-19
In accordance with Circolare 15/2020, all workers operating at the beamline must observe to the following rules:
- Maintain a safe distance of at least 1m and minimize contact with other persons.
- Coordinate work in order to reduce contact times. Split the work into shifts or into separate days whenever possible.
- Always carry a surgical-type mask with you and wear it whenever a distance of at least 1m cannot be maintained.
- A maximum number of two persons (including, when authorized, external users) is allowed work at each beamline experimental station and in ventilated rooms (experimental hutches, laboratories) without masks as long as a distance of at least 1m can be maintained. Whenever more than two people are needed to perform an experiment, a preliminary authorization should be obtained from the group coordinators.
- Masks must not be shared. Used surgical-type masks must be discarded in the dedicated bins. Information on bin locations can be found here.
- Wash hands with soap regularly following the established rules. In addition, hand sanitizer dispensers can be found on site.
- The equipment shared by multiple persons has to be cleaned with disinfectants before and after each use. Whenever that is not possible, gloves will have to be worn by each researcher.
The SPP (Servizio Prevenzione e Protezione) can provide all workers on site with a set of 5 surgical-type masks. Additional information can be found here.
Work places
A maximum presence of two people is allowed. The workstations have been marked with tape and are shown in the pictures below. One (left) is at the control workstation and the other at the data analysis workstation (center) . Please note that if the TIMEX control workstation is being used, using the workstation at TIMER (right) is forbidden.
|
|
|
Last Updated on Tuesday, 19 May 2020 16:55